Error: 5104_Error Initializing CCD

Error: 5104_Error Initializing CCD

Problem: This may happen when the computer is unused for period of time and sleeps or hibernates.
Solution: Don’t reboot. Do a full shutdown of the PC. First, verify that

  1. The orange MTRJ fiber is connected at both ends. Note that CCDs with 3-digit serial numbers plug into the black plastic connector of the PCIe card, while 4-digit serial numbers plug into the metal connector of the PCIe card.
  2. On power up, check that the CCD power LED blinks, then stays green.

Problem: Software is calling the wrong CCD driver
Solution: Refer to Selecting CCD in RossApp_AppNote_SI-400379.pdf