Programmable Laser Pulse Shaper

PLPS Specifications

• Rise / Fall Time: 10 ns, (50 pF load, without software smoothing); 30 ns, (50 pF load, with software smoothing)
• Amplitude: ~750 volts
• Duration: <= 1 μs
• Sample Rate: ~300 MHz
• Max Trigger Rate: 50 Hz
• Number of Samples: 1500 (3000 bytes)*
• Trigger : TTL
• Trigger Jitter: < 1 ns
• Proportional Monitor: ~2 V into 50 ohms, divided down from output Interface: RS232 / USB
• Power: 100-230 V AC, > 30A

Controls / Indications

• AC Power: Rocker switch
• Trigger Input: BNC
• Pre-Trigger Output: BNC
• Modulator Drive: SHV
• Proportional Monitor: BNC
• Power: LED
• Triggered: LED
• Bias Adjustment: Trim-potentiometer on rear panel.