Sydor Diamond Beam Position Monitor
Precision. Intensity and Flux.
Manufactured for real-time, non-destructive X-Ray beam diagnostics using radiation-hard synthetic diamond sensors. Achieve accurate beam position, timing, and intensity measurements without interfering with beam transmission.
Key Benefits
- Enhanced cooling enables use of both white and pink beams.
- Standard monitors feature 20-50 μm electronic-grade single crystal diamond (EGSCD), thinner available upon request.
- Position resolution down to 0.1% of the beam’s diameter, down to 25 nm<0.1 pA leakage current, orders of magnitude less than alternative beam monitoring solutions.
- Ultra-high vacuum, vacuum, and in-air models available in stage-mounted and flange-mounted designs.
| Performance Specifications | |
|---|---|
| Energy Range | 3 KeV and above |
| Diamond Active Area | 3 mm × 3 mm diamond |
| Housing Aperture | 3.2 mm |
| Typical Bias Voltage Range | +10 or -10 VDC (higher possible) |
| Available Contact Metals | Pt & Al standard |
| Operating Environment | In-Air, Inert gas or Vacuum |
| Bake Out Temperatures | Up to 120ºC |
Sydor T4U Electrometer
Designed to pair seamlessly with Sydor’s diamond-based monitors, the T4U Electrometer delivers low-noise, high-speed readout for precise measurement of current, position, and timing. Enables real-time beamline feedback and control integration.
Key Benefits
- Precise readout and output control for four channels with integrated ultra-stable bias output.
- User-friendly software to visualize the readout, control, and trends of the process.
- T4U with PID provides embedded DAC outputs to link to feedback devices for easy calibration and fast feedback control with nanometer precision.
| Performance Specifications | |
|---|---|
| Readout Channels | 4 |
| Measurement Range | <100 pA–5 mA |
| Resolution | Up to 20 bit |
| Gain Selection | Low, Medium, High |
| Data Rate | 2.5 kS/s |
| Bias Voltage Output | +/- 20 V |
Resources
Brochure